fbpx
We will no longer be accepting new purchases of VisualLive. Learn more here.  

VisualLive Adapters for HoloLens 2

Hololens hardhat

$199 USD

Order Quantity :
By clicking 'Buy Now', you hereby agree with our Terms and Conditions.
How to order:
Click Buy Now > Type Quantity > Select “Check out as Guest” > Fill out Shipping Address > Pay.

Delivery for US clients: 3-4 business days –  International: 4-10 business days. Please note these delivery times are estimates only and are subject to change. 

* The package only includes the hardhat Adapter (a pair of left and right clips). Hardhat is not included. Please read FAQ.

VisualLive’s Exclusive HoloLens2 Hard Hat Adapter

The HoloLens to hard hat clips allow you to safely use HoloLens2 in the field, project sites and PPE required areas. Our simple solution features a clip system that easily installs through the hard hat to the HoloLens 2 headset.

Installation takes only a few seconds and the HoloLens 2 can be easily removed from the hard hat when you are no longer in an area that has safety restrictions.

Microsoft HoloLens + VisualLive Hardhat Adapter

Site-Ready Solution

VisaulLive HoloLens2 hardhat

Specification:

  • No change or modification to the hardhat and its suspensions
  • Quick Installation for field use – Easy to remove for office use.
  • Adjustable locking notches
  • Detachable from hard hat for office use
  • Weight: Very light. Each side: 7.6g (0.016 Ibs). Total: 15.2g
  • Setup/detach time: 15-30 seconds
  • Included free with VisualLive HoloLens2 Bundle
  • Works with any pin-lock suspension hardhat models
  • Small enough to carry inside the HoloLens2 original box

How it works Video:

In this video you learn how to attach your HoloLens2 device to hardhat using VisualLive adapter

OSHA-Approved and ANSI-Certified Hardhats:

VisualLive hardhat adapter for HoloLens2 is compatible with almost all pin-lock adjustment suspensions cap-style hardhats. However, we recommend the below off-the-shelf OSHA approved and ANSI Z89.1 certified hardhats for our clients to purchase with their VisualLive adapters.

3M – Non-Vented Hard Hat with Pinlock Adjustment

  • ANSI compliant when worn in the forward and reverse donning positions
  • Meets requirements of ANSI Z89.1-2014 and CSA Z94.1-2015 Type 1, Class G and E  

Bullard – 4-Point Pinlock Suspension Cap Style Hard Hat

  • Self-sizing 4-point pin-lock suspension (RS4PC) incremental sizing of 1/16 in with Vertical height adjustment capability for secure fit
  • ANSI Certified, OSHA Certified
Frequently Asked Questions:

Hardhat Clips

You can keep your safety glass or any prescription glasses while you have HoloLens2 on as it sits nicely on your glasses. However, HoloLens2 with VisualLive hardhat bundle can be fully used with no safety glass as the device has been tested and conforms to the basic impact protection requirements of ANSI Z87.1, CSA Z94.3 and EN 166. Reference

Yes. You can adjust it based on the head size and your comfort with locking notches.

Yes. The nice thing about VisualLive hardhat solution for HoloLens2 is that it allows you to have a HoloLens2 device without hardhat for office use or with hardhat for job site use. We recommend you to keep the clips inside HoloLens2 case so you do not lose them

You can get the hardhat from any hardware store. It usually costs about $7 USD. Based on the feedback from various clients, we recommend the below hardhats:

– 3M, Non-Vented Hardhat with Pinlock Adjustment: Link to buy

– Bullard, 4 point Pinlock Suspension Cap Style Hard Hat: Link to buy

It works with any standard hard hat. In order for users to be able to flip the HoloLens2 visor up and down easily, we recommend short-brim (cap style) hardhats. Please note that the suspensions on hardhats must be the pin-lock system (no ratchet).

No. These clips are designed only for HoloLens2 device.

Do you also need to visualize BIM or CAD models with your HoloLens?

VisualLive is the most advanced Augmented Reality software in Design, Engineering, and Construction, used by 1500+ companies. Using our plugins or web portal, you can upload your 3D CAD or BIM model files to HoloLens1 or HoloLens2.
 
Simply install ‘VisualLive’ app on your headset to view your model on jobsite 1:1 scale on real location. VisualLive apps also gives you 25 advanced features for collaboration, inspection, documentation and field productivity tools.